Adam Equipment Luna LAB 124 e, Руководство по эксплуатации

Страница: 22 / 48

© Adam Equipment Company 2020
Remove the sample and  .  will be displayed
Now place an unknown sample on the pan to display the percentage weight relative to the
original sample.
To set another weight as 100%, press
[Mode] and repeat as before or press [Esc] to return
to normal weighing.
10.4.2.2 Manual method:
To manually enter a value to be set as 100%, when 
%
is displayed, press [Setup] .
The display will briefly show  followed by a weight value in the unit last used in the
weighing mode.
Change the displayed weight to the required sample weight using the direction keys and
numeric entry method and press
[Setup] to enter the value. The display will now return to
zero.
Now place unknown samples on the pan to display the percentage weight relative to the set
sample weight.
To repeat percent weighing with another sample press
[Mode] and continue as before, or
to return to normal weighing mode, press [Mode] followed by [  0/T  ] .
NOTE : Percentage will be initially displayed to the maximum number of decimal places
based on the resolution of the balance. To increase or decrease by one decimal place, press
the
[Up] or [Down] key respectively.
10.4.3
Check weighing

Press [Mode] and then the [Up] or [Down] keys until the check symbol is displayed.

Now enter check weighing mode by pressing [Setup] .

Display will show Low Lim (  ); press [Up] or [Down] keys to toggle this from
‘’on’’ to ‘’off’’. If the lower limit is set to ‘’on’’, pressing [Setup] key will allow you to
enter a value for the lower limit using the numeric entry method.

If the lower limit is set to ‘’off’’, pressing the [Setup] key will then show the last value
set for the high limit; this can be changed using the numeric entry method.

If a low limit is set the next option is to set the high limit using numeric entry
method.

Once the high limit is set, the next option displayed is ‘’ Buzzer ’’, available settings for
this, using the [Up] and [Down] keys, are: ‘’off’’, ‘’in’’ and ‘’out’’. The settings
determine when an audible alarm sounds, either never, when the weight is in the
limits or outside of set limits. Once set, press the
[Setup] key to begin check
weighing.

Pressing [Mode] and then [Esc] key returns to normal weighing.