Adam Equipment Luna LAB 124 e, Руководство по эксплуатации

Страница: 19 / 48

© Adam Equipment Company 2020
10.3 WEIGHING
Press [  0/T  ] to zero the balance if required. The “ 
0
 “ symbol will be displayed.
Carefully place a mass on the pan and the weight will be displayed with the
symbol on
the left hand side of the display to indicate that a stable reading has been obtained.
If a container is to be used, place it on the balance and press
[  0/T  ] to tare the weight.
When the balance symbol is on, the “Net” symbol will be displayed to indicate that the
balance is tared.
When the display shows zero, place the item to be weighed. Only the net weight will be
displayed.
When a tared weight has been stored, pressing
[  0/T  ] again will remove it .
At any time the
[Unit] key may be pressed to select another unit. Use the [Up] or [Down]
keys to scroll through the units and select the desired unit by pressing [Setup] , the display
will change to show the weight in the selected weighing unit. The available weighing units
can be enabled or disabled during setup of the balance (see section 13.1). Only weighing
units that have been enabled will be cycled through when
[Unit] is pressed.
Weighing Units:
You can select alternative weighing units to display the weight by pressing the [Unit] key.
Depending on model, the available weighing units may include:
Unit Symbol Models
Conversion
Factor
1g = Conversion
Factor
1 unit = grams
1 GRAMS g All 1 1.0
2 MILLIGRAMS mg not 0.01g & 0.1g
units 1000 0.001
3 KILOGRAMS kg 0.01g & 0.1g units 0.001 1000
4 CARATS ct All 5 0.2000
5 PENNYWEIGHT dwt Some models 0.643014865 1.555174
6 GRAINS GN Some models 15.43236 0.0647989
7 TROY OUNCES ozt Some models 0.032150747 31.103476
8 OUNCES oz Some models 0.035273962 28.349523
9 POUNDS lb Some models 0.00220462 453.59237
10 CUSTOM Custom Some models As specified As specified
It is possible to set the balance to display only grams. Grams will always be one of the units
enabled, by default.