Adam Equipment Luna LAB 124 e, Руководство по эксплуатации

Страница: 35 / 48

© Adam Equipment Company 2020
If a passcode is incorrectly entered then the message  will flash and the display
will return to  
Forgotten Passcodes:
Keep a record of the passcode to ensure you can access this section again. If however you
have forgotten your passcode you can still gain access by entering a universal code.
If you have forgotten the current passcode a code of “15” will always allow you to enter the
Supervisor area. Using the Supervisor menus, go to PASSCODE section. Reset the
Operator or Supervisor passcode using
 as the old passcode when prompted.
14.0 ACCESSORIES & SPARE PARTS
Accessories that are available for use with the balance include the following:
14.1 DENSITY DETERMINATION KIT
(For 0.0001 g and 0.001 g units only)
The Density Determination Kits include everything needed to carry out precise and
repeatable measurement. The kit allows a sample to be weighed in air and then a liquid to
determine the density of the sample. It also allows a glass sinker of known volume to be
weighed in air or in a liquid, to determine the density of the liquid.
14.2 ANTI-VIBRATION TABLE
The anti-vibration table is a support for laboratory balances that isolate the balance from
vibration through the floor. The table has a granite surface for the balance with a separate
table top surrounding the balance.
14.3 ADAM THERMAL PRINTER (ATP)
A compact thermal printer is available which is ideal for use with laboratory balances.
14.4 ADAM IMPACT PRINTER (AIP)
A high speed, compact and concise, dot-matrix printer supplied with RS232 interface and
USB port is available as well.
14.5 BELOW-BALANCE WEIGHING HOOK
If objects are too large or difficult to place safely on the weighing pan of a balance then a
load can be supported from a hook on the underside of the balance. This application is
commonly referred to as “below balance” or “underfloor” weighing. All models in the Luna
range are equipped with the facility to attach a hook below the balance and suitable hooks
are available. No special software is required – weighing processes are otherwise performed
as normal.
14.6 IN-USE PROTECTIVE COVER
For cleanliness and hygiene reasons, and to protect the keypad and display from liquids,
chemicals and particulates, and general wear, use of a transparent semi-disposable
protective slip-on cover is highly recommended.