Adam Equipment Luna LAB 124 e, Руководство по эксплуатации

Страница: 17 / 48

© Adam Equipment Company 2020
8.1 NUMERIC ENTRY METHOD
To set a value when required, use the keys as given below:-
[Up] and [Down] symbol keys start entry process, causing the active digit to flash.
Press [Up] and [Down] to increase or decrease the flashing digit.
Once each digit is set to the required value, use the [Left] symbol keys to advance or move
back through the digits and then press [Up] and [Down] to increase or decrease the flashing
digit as required.
Once the value displayed on screen is as required, press the [Setup] key to accept or enter
the displayed value.
Press the [  0/T  ] key to exit the menu at any time.
9 INPUT/OUTPUT
The rear panel has some or all of the following connectors depending on model:

RS-232 serial - 9 pin d-subminiature plug.

USB type A socket.

Power input socket. (Required power input is a low-voltage external supply,
18VDC @ 830mA for all models). Accepts concentric barrel plug 11.4mm
length X 5.5mm outside diameter X 2.1mm centre diameter.