Adam Equipment Luna LAB 124 e, Руководство по эксплуатации

Страница: 37 / 48

© Adam Equipment Company 2020
Material that has a static electric charge could influence the weighing. Discharge the static
electricity of the samples, if possible. Another solution to the problem is to wipe both sides
of the pan and the top of the case with an anti-static agent.
16.0 TROUBLE-SHOOTING
Service of a Luna balance will generally be necessary when the balance does not perform
as expected. The balances are not user-serviceable. For Service Information, see section
18.0 and contact Adam Equipment or your supplier.
Problems usually fall into one of the following categories:

User Problems:
The user is asking the balance for something it cannot do or is confused by the modes and
functions of a balance. It is also possible the user has set a parameter that has affected the
balance operation. Resetting the parameter to a normal value will restore operation.

Mechanical Problems
The balances consist of complicated and fragile mechanical devices. They can be damaged
by placing a weight on it which is too high for the balance, or by dropping the balance or
occasionally shipping it without taking care. The most fragile parts are the flexures. Dust,
dirt, spills and other foreign objects in the balance can also cause problems.

Electronic Problems:
These are the rarest of the problems affecting balances. If an electronic problem is
suspected make sure the mechanical problems that can cause similar symptoms have been
eliminated before attempting electronic repairs. With the exception of cables most electronic
repairs are solved by board replacement.
The trouble-shooting table in section 16.1 is a guide of common problems and their
solutions. Note that many problems may have multiple solutions and there may be problems
found that are not listed in the table. For Service Information, contact Adam Equipment or
your supplier.