PAritY
8 n 1
7 E 1
7 o 1
8 data bits, no parity
7 data bits, even parity
7 data bits, odd parity
U id
“U id”
“ Abc234”
“ “
Shows the current user ID (if any).
Enter a new User ID as described in the Description
under the PLU section. The ID can be alpha-
numeric but is limited to 6 characters.
SC id
“Sc id”
“ Abc234”
“ “
Shows the current scale ID (if any).
Enter a new Scale ID as described in the
Description under the PLU section. The ID can be
alpha-numeric but is limited to 6 characters.
tECH
Allows access to the Technical parameters using a
password. Not normally accessed by user.
8.0 BATTERY
OPERATION
•
The scales can be operated from the battery if desired. The battery
life is approximately 70 hours if only the basic unit is used. If a
second platform is used the battery life will be reduced.
•
When the battery needs charging the arrow above the low battery
symbol under the “
Weight
” display will turn on. The battery should
be charged as soon as the arrow above the symbol is on. The scale
will still operate for about 10 hours after which it will automatically
switch off to protect the battery.
•
To charge the battery simply plug into the mains power. The scale
need not to be turned on.
•
The battery should be charged for 12 hours for full capacity.
•
Just under the “
Count
” display is an LED to indicate the status of
battery charging. When the scale is plugged into the main power the
internal battery will be charged. If the LED is green the battery has a
full charge. If it is red, the battery is nearly discharged and yellow
indicates the battery is nearly charged.
NOTE
: It is recommended that the battery be charged before using the scale
when the unit has been unpacked.
© Adam Equipment Company 2005
24
