6.2 MEMORY
FUNCTIONS
The
[M+]
key will add the results of a weighing into memory, regardless of
whether the local or remote scale is being used for the weighing.
6.2.1 Manual accumulation
•
The values (weight and count) shown on the display can be added to
the values in the accumulator by pressing the
[M+]
key. The
"
Weight
" display will show the total weight, the "
Count
" display will
show the total accumulated count and the "
Unit Weight
" display
shows the number of times items have been added to the
accumulation memory. The values will be displayed for 2 seconds
before returning to normal.
•
The scale must return to zero or a negative number before another
sample can be added to the memory.
•
More products can then be added and the
[M+]
key pressed again.
This can continue for up to 99 entries or until the capacity of the
“
Weight
” display is exceeded.
•
To observe the total value stored, press the
[M+]
key when the scale
is at zero. The total will be displayed for 2 seconds.
•
To clear the memory, first press
[M+]
to recall the total from the
memory and then press
[CE]
to clear all values from the memory.
6.2.2 Automatic accumulated total
•
The scale can be set to automatically accumulate total when a
weight is placed on the scale. This eliminates the need to press the
[M+]
key to store values into the memory. However the
[M+]
key is
still active and can be pressed to store the values immediately. In
this case, the values will not be stored when the scale returns to
zero.
•
See PARAMETERS Section on enabling Automatic Accumulation.
© Adam Equipment Company 2005
14
