•
If the tare value stored does not match the increment of the selected scale
(For example, storing -1.446 for a scale with d=0.05) then round the tare
weight depending on the scale resolution (For example, in this case, -1.45
would be used as the tare value).
•
If a PLU number is recalled that does not have any information stored
against it, the scale will continue to work with Tare and Unit weight
unchanged.
7.0 PARAMETERS
The parameters are split into 2 sections, one for the managers and the other
one for Technical.
7.1 USER
PARAMETERS
Enter the User Parameters section by pressing the
[Pst]
key during the self-test
when the power is turned on. This will allow the user to set the way he wants the
scale to work by choosing specific values from some options.
Press the
[U.Wt./Units]
key to scroll through the other parameters. To enter any
parameter, press the
[Print]
key.
Press
[U.Wt./Units]
to scroll through the sub-parameters. To see the earlier
setting, press the
[Print]
key. To change and scroll through the other available
settings, press
[U.Wt.]
. To choose the desired setting and thereby go back to
the sub-parameter, press the
[Print]
key.
To return to the parameter, press the
[Tare/Zero]
key.
PARA-
METER
SUB-
PARAMETER
DISPLAYS AND SETTINGS
F1 oFF
bEEP
“bEEP"“ "oFF"”
Beeper is set to off
PLU’s can be stored and recalled using RS-232 Interface (see section 9.1
and 9.2 of this user Manual).
© Adam Equipment Company 2005
22
