5.2 UNIT WEIGHT WINDOW
•
This display will show the unit weight of a sample. This value is
either entered by the user manually or computed by the scale. The
unit of measure is either gram on all scales with kilogram selected as
weighing unit or in pounds.
•
When the scale has determined that there is insufficient number of
samples to accurately determine the count, an arrow will be shown
above "
Smpl
".
•
When the unit weight is not large enough to determine an accurate
count, the arrow will show at "
U.Wt
".
•
When a value has been entered into the memory, the arrow above
"
M+
" will be on.
•
In both the cases the scale continues to operate and the indicators
are to alert the user of a potential problem.
5.3 COUNT
WINDOW
•
This display will show the number of items on the scale or the value
of the accumulated count. See the OPERATION section.
•
An arrow above the symbols will indicate the following:
Checkweighing is active during counting, "Ck Pcs"
Checkweighing is active during weighing, “Ck Wt”
Checkweighing is active, result is above the High Limit, “High”
Checkweighing is active, result is between the Low and High Limit, “OK”
Checkweighing is active, result is below the High Limit, “Low”
•
Just under the “
Count
” display is an LED to indicate the status of the
battery charging. When the scale is plugged into the main power the
internal battery will be charged. If the LED is green, the battery has
a full charge. If it is red, the battery requires further charging and
yellow indicates the battery is being charged.
© Adam Equipment Company 2005
10
