3.0 INSTALLATION
3.1 LOCATING THE SCALES
•
The scales should not be placed in a location
that will reduce the accuracy.
•
Avoid extremes of temperature. Do not place
in direct sunlight or near air conditioning
vents.
•
Avoid unsuitable tables. The table or floor
must be rigid and not vibrate.
•
Avoid unstable power sources. Do not use
near large users of electricity such as welding
equipment or large motors.
•
Do not place near vibrating machinery.
•
Avoid high humidity that might cause
condensation. Avoid direct contact with water.
Do not spray or immerse the scales in water.
•
Avoid air movement such as from fans or
opening doors. Do not place near open
windows or air-conditioning vents.
•
Keep the scales clean. Do not stack material
on the scales when they are not in use.
3.2 SETTING UP THE SCALES
SETTING UP THE LOCAL SCALE
•
The CBDa Series comes with a stainless steel platform packed
separately.
•
Place the platform in the locating holes on the top cover.
•
Do not press with excessive force as this could damage the load cell
inside.
© Adam Equipment Company 2005
5
