6.4.2 ENTERING DESCRIPTION MANUALLY
The description can be up to 12 characters long and can be a mix of numbers,
symbols or letters.
During the procedure to set the description the numeric keypad will work in a
similar way to a mobile telephone. Pressing a number briefly will show the
number and holding it down will scroll through all the characters.
The numbers and characters are:
1 - / \
2 A B C
3 D E F
4 G H I
5 J K L
6 M N O
7 P Q R S
8 T U V
9 W X Y Z
0 _ [ ] Where _ is a Space (Not underscore)
The limitations of the 7 segment display sometimes make it difficult to display
some letters. The characters and the displayed symbols are:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z - / \ ( )
The characters will be stored as text so the output of the RS-232 interface will
be correct.
The numbers 1 2 3 4 5 6 7 8 9 0 will be
1 2 3 4 5 6 7 8 9 0
Note that this method is only used where alpha-numeric data is permitted. This
is used for the Description field and the User ID number, Scale ID number in the
parameters section.
© Adam Equipment Company 2005
20
