Please find below an example for setting up “
PLU 27
” with Description as “
M4 Nut
”
and Unit weight of “
0.015
”.
DISPLAYS
ACTIONS
Weight Unit weight Count
REMARKS
Press
[PLU]
“PLU ”
“ - -“
“ “
-
Press
[2]
,
[7]
“PLU ” “ 27”
“ “
-
Press
[Pst]
“PLU 27”
“x x x x x x”
“x x x ”
The current
description will be
shown with the first
character flashing.
The flashing digit can
be changed as stated
in the
Note
below.
Pressing the
[CE]
key when the first
character is
flashing will clear
all the descriptions.
“PLU 27 ” “ “
“ “
-
Continue to enter
characters until
description is
complete.
“PLU 27 ” “M 4 Nut“
“Brass “
12 characters in total
spreading over both
the displays (UNIT
WEIGHT and
COUNT).
Press
[Print]
to
save the PLU.
“x . x x x” “ x“
“ x“
The display will go
back to the normal
mode.
Note:
Use the
[.]
key to go back to the previous digit or the
[M+]
key to advance to the next
character.
A flashing character can be used for entering a space by pressing the
[0]
key for slightly
longer duration.
Tare value will only be stored with PLU data if the scale is in the NET mode. If the container
is less then the manual zero range which is set in "Technical parameters" (default is 2% of
capacity) then the scale will be Zeroed and no tare value will be stored. To avoid this, use a
larger container, reduce the zero range or use the digital tare method.
© Adam Equipment Company 2005
19
