22
In case if stability is not achieved & user presses <TARE> key, display will shows
“---------------” until stability is achieved.
Display then shows “0.0000 gm”
4.0.3 Switching of weight units
All Aczet balances can display weight values in different weight units.
The
factory setting
is Unit 1 (gm), Unit 2 (ct), Unit 3 (gm)
Switching between unit 1, unit 2 and unit 3
ð
Press <TOGGLE> key the display switches to the 2nd weight unit.
ð
Press <TOGGLE> key again, the display switches to the 3rd weight unit. OR
Application unit (If same is selected in menu)
Note :
With
certified balances
the unit selection can be blocked following installation
if required by national legislation.
21
Switching of Weight Units
------------------------
20-Jul-10 10:35AM
Aczet
Model CY 224
Ser.no. 9223102
Ver.no. r0.1.5.3
ID 1234567
------------------------
LID: 1111111
+ 49.9999 g
+ 249.9990 ct
+ 1.763690 oz
+ 49.9998 g
+ 249.9990 ct
+ 1.763690 oz
+ 49.9999 g
------------------------
20-Jul-10 10:36AM
Name:
................
------------------------
When GLP ON
Print out generated when
Unit Toggling is done between
Unit1 (g), Unit2 (ct), Unit3 (Oz)
in Simple Weighing.
+ 49.9999 g
+ 249.9990 ct
+ 1.763690 oz
+ 49.9998 g
+ 249.9990 ct
+ 1.763690 oz
+ 49.9999 g
When GLP OFF
Print out generated when
Unit Toggling is done between
Unit1 (g), Unit2 (ct), Unit3 (Oz)
in Simple Weighing.
4.0.4 Simple weighing Print out
Note :
1) User cannot enter into the external calibration or menu when GLP is ON & footer has not been printed.
2) To print footer user will have to Press <CANCEL> key.
