Aczet CY 1003, Руководство по эксплуатации

Страница: 23 / 69

USER MENU PRINT OUT
Press the Print Key in the user Menu to Print the current status of user menu.
43
When GLP ON When GLP OFF
------------------------------------
14-Jul-10
03:46PM
Aczet
Model
CY 224
Ser.no. 9930508
Ver.no. R0.1.04
ID 1234567
------------------------------------
App
: F Per
Unit1 : g
Unit2 : ct
Unit3 : g
Stb : 2
Cal : Ext
Cal test : Off
Azt : On
Baudrate : 9600
Parity : None
Stop bit : 1
Print : Request
GLP : On
Auto Off : Off
------------------------------------
14-Jul-10
03:46PM
Name: ................
------------------------------------
App : F Per
Unit1 : g
Unit2 : ct
Unit3 : g
Stb : 2
Cal : Ext
Cal test : Off
Azt : On
Baudrate : 9600
Parity : None
Stop bit : 1
Print : Request
GLP : On
Auto Off : Off
6.1 Piece counting
Procedure
Piece counting presupposes that you have preselected the “F count” function in the
menu
ð Place the empty container on the pan.
ð
Press the <TARE> key briefly to tare the balance.
ð Press the <TOGGLE> key briefly until “ PCS ” appears on the display.
Your balance now needs the weight of a reference number.
ð Press and hold the <TOGGLE> key until you are prompted to load the reference
pieces.
ð Your balance suggests the last set reference no. as the reference number.
You can accept this suggestion or select one of the other reference numbers
available (5, 10, 20,50, 100 pieces, Free, wref, Update) by briefly pressing the
<TOGGLE> key.
Note : We recommend you to choose a reference number as high as possible as the
balance determines the average weight per piece and stores it as the reference
weight. As it is seldom, that all pieces weigh exactly the same, the larger the reference
number selected, the greater the accuracy of the reference weight. This application
assumes uniform weight of each piece.
ð
When you have placed exactly the same number of pieces on the weighing pan as
selected reference pieces press TARE key.
As soon as the weighing result is stable, the calculated average piece weight is
accepted as the reference.
ð After your balance has determined the piece weight, it displays the pieces as per
selected number and is now ready for piece counting.
You can use the <TOGGLE> key at any time to switch the display between the
piece number display, weighing unit 1 and weighing unit 2.
Note : The current set weight remains stored until it has been redetermined.
44
6. Functions