91
Reading the statistics
ð
At any point of time, the user can press and hold the <TOGGLE> key for 2 seconds to
go through the statistics.
st
ð
The screen will display the 1 parameter as number of readings 'n' along with the star
symbol which indicates that the user is in the statistics result mode.
ð
The user can now go through the other parameters such as average, Min value, M a x
value, Standard deviation, Difference, Co efficient of Variance by pressing the
<TOGGLE> key.
ð
The user can come out of the statistics mode by pressing the < CANCEL > key.
Deleting statistics:
ð
The user can delete the statistics by pressing the <TARE> key for 2 seconds when in
'StAt' mode.
ð
This will delete the previous data entries and start again.
ð
The entire data is will be sent to the terminal or to the printer before it gets deleted.
Note:
ð
The minimum weight on the pan should be 10d (where'd' is the accuracy of the
scale), if less than that, then the weight will not be taken into consideration for
calculating statistics.
ð
The statistics will be deleted if the system goes into standby mode (i.e. if the auto-off
feature is active or by power on-off).
ð
The user can also print the statistics by pressing the <PRINT> key when in 'StAt' mode.
-----------------------------------
28-Jul-10 03:19PM
Aczet
Model
CY 224
Ser.no.
9223102
Ver.no.
r0.1.5.3
ID
1234567
-----------------------------------
1 +
1.5750 g
2 +
2.3500 g
3 +
7.8950 g
4 +
4.1750 g
-----------------------------------
n
4
max
7.8950 g
min
1.5750 g
avg
3.9987
std
2.8169
var
7.9349
-----------------------------------
28-Jul-10
03:23PM
Name:
................
-----------------------------------
-----------------------------------
1 +
1.5750 g
2 +
2.3500 g
3 +
7.8950 g
4 +
4.1750 g
-----------------------------------
n
4
max
7.8950 g
min
1.5750 g
avg
3.9987
std
2.8169
var
7.9349
-----------------------------------
WITH GLP ON
WITH GLP OFF
92
If the balance is connected externally to PC or Printer through RS 232 C then, whenever user enter into the menu of Statistics & presses in the
print key , the user can obtain the list of parameters shown in the below example :
