Activant Dimensions Скачать руководство пользователя страница 473

Страница: 473 / 490

Appendix D

Part 4: What to Do in Case of …

Power Failure

All systems come equipped with an uninterruptible power source (UPS)

which serves as a battery backup and power conditioner for the CPU. If the

power to your system were to fail all of a sudden, the CPU would draw its

power from the UPS. Depending on the model of UPS, it could supply power

from 10-20 minutes. However, the power to all peripherals would be lost.

After power goes off, wait 5-10 minutes to see if it will come on again

momentarily. Most power failures are corrected in a matter of minutes. If it
looks as if you are in for a long-term wait,

BYE

or log off all terminals (from

the system monitor on SuperDOS systems, use

MMI

-- see Appendix A,

SuperDOS Utilities Used Most Often,

MMI

BYE

or log off the system

monitor too.

Turn off the computer (CPU) and wait until the power is restored. If desired,

you can write sales tickets by hand and enter them into the computer once

the power is restored.

When the power comes on, turn on the computer (CPU). The system monitor

will be at the

Password

or login screen but the other terminal ports will

probably return to the screen or previous menu where they were working

when the power failed. Any terminals which had been working in

Transaction Entry (POS) or Purchasing and Receiving may receive the option

of recovering the previous transaction when they go back in to start
processing. They can answer

and finish the transaction or

to cancel the

previous transaction and not work on it.

Enter any hand-written sales tickets to record the transactions, which

occurred during the power failure. You can return to normal processing.

NOTES:

Dimensions 14

465

Содержание Dimensions











































































































































































































































































































































































































































































































Результаты поиска

Содержание Dimensions

Отзывы:

Activant Dimensions, Начало работы, Страница: 473 / 490

Результаты поиска

Содержание Dimensions

Отзывы: