Activant Dimensions Скачать руководство пользователя страница 430

Страница: 430 / 490

Appendix C

24. Stock Code

1. Used in the suggested order system.

= minimum/maximum are set manually, not

calculated.

= discontinued.

= last 6 months of IM3.D history. Will pick up

the business trend. Used on the Open to Buy

- Format C report. Use on non-seasonal

items.

= previous 6 months of IM3.D history (6

months forward from this time last year).

Use on seasonal items (lawn mowers, snow

blowers). Used on the Open to Buy - Format

C report.

25. Price Round Code

1. Blank = do not round price for this item.

= round price to 5’s and 9’s. See the following

chart.

Price Rounding Code = A ( 5 or 9)

If value is less than .49

leave as is

If value is $.50 - $2.00

cents = 1 to 5

down to prev. .99

6 to 19

put at .19

range 20 to 99

end in 5 or 9

leave as is

0 or 1

down to prev. 9

2 to 4

up to 5

6 to 8

up to 9

If value is $6.05 - $10.00

cents = 6 to 21

down to prev. .99

range 22 to 99

end in 2 to 9

up to 9

0 or 1

down to prev. 9

If value is $10.00 - $20.00

cents = 0 to 15

down to prev. 99

16 to 65

put at 49

66 to 99

up to 99

If value is $20.00 - $100.00

cents = 0 to 40

down to prev. 99

41 to 99

up to 99

If value is $100.00 - $200.00

tens = 0 to 2.40

down to 99

2.41 to 6.00

up to 4.99

6.01 to 9.99

up to 9.99

If value is $200.00 or over

tens = 0 to 4.00

down to 9.99

4.01 to 9.99

up to 9.99

26. Purchasing Code

1. This field works in conjunction with the

purchasing function. It allows you to purchase at

one unit of measure and sell at another. You can

use one of the following codes or leave blank for

no special purchasing features.

422

Dimensions 14

Содержание Dimensions











































































































































































































































































































































































































































































































Результаты поиска

Содержание Dimensions

Отзывы:

Activant Dimensions, Начало работы, Страница: 430 / 490

Результаты поиска

Содержание Dimensions

Отзывы: