Activant Dimensions Скачать руководство пользователя страница 43

Страница: 43 / 490

Chapter 2. System Training

System Prompt (>) - SuperDOS

The system prompt for the SuperDOS operating system is

. Sometimes it is

referred to as simply “the prompt”. This symbol appears on the far left side of the

screen after you enter a valid password indicating you have logged on successfully

or after ending from the Main Menu indicating you are ready to log off the

password. It indicates that SuperDOS is ready for you to enter the next

command.

)

NOTE:

Most passwords are set up so that the menu shows immediately after entering the

password rather than go to the system prompt. This saves you a step when signing on
the computer.

There are many commands that can be entered at the system prompt. For now,

you need to know only two--

BYE

and

BYE

When entered at the system prompt and followed by pressing

Enter

, this

command logs off the password and returns the terminal to the PASSWORD

screen. For example:

>BYE

It terminates the session under any password. You can also enter simply

and

press

Enter

There is a shortcut using BYE to log off one password and log on another with one
command. Enter

BYE

, one space, the password with which you wish to log on,

and press

Enter

. For example:

>BYE SAMPLE

This command logs off the old password and logs on the new password SAMPLE.
Make sure to leave a space after

BYE

and before the new password.

“M” stands for menu. When entered at the system prompt and followed by
pressing

Enter

, this command displays the Dimensions Main Menu again (or the

last menu displayed before falling out to the system prompt).

Dimensions 14

Содержание Dimensions











































































































































































































































































































































































































































































































Результаты поиска

Содержание Dimensions

Отзывы:

Activant Dimensions, Начало работы, Страница: 43 / 490

Результаты поиска

Содержание Dimensions

Отзывы: