Operation
69/ 80
LipuJet-P-OB / -OD, LipuJet-P-OA / -OAP
EN
5.3 Supervision during regular operation
Only such cleaning agents, rinsing agents, detergents, disinfectants and additives may
be fed into the wastewater which do not contain or release chlorine, which are separator-
friendly and do not generate any stable emulsions.
The following is recommended for further reduction of total wastewater load:
Consequent removal of any leftovers from dishes and pre-rinsing of dishes without
cleaning agents prior to placing them into the dishwasher. In cooperation with the
cleaning agents supplier, the dosage of the cleaner for the dishwasher is to be reduced, if
acceptable for hygienic reasons.
Check
Plant operability should be checked regularly, at least
once a week
, by a properly
qualified person.
This check includes following measures:
Visual check of separator plant and its connections, visual check of fittings (e. g. pumps)
and electrical components, determination of sludge volume in sludge trap (max. half of
sludge trap volume), determination of grease layer thickness in the separator, possible
removal of coarse floating substances on water surface, operating the high-pressure
internal cleaning.
If defects are ascertained during check, these have to be remedied without delay. The
checks carried out and the possible defects and their remedy have to be documented in
the operating log.
5.4 Disposal process via programme (LipuJet-P-
OA, -OAP)
1. Arrival of disposal truck, connect
suction hose from pump truck at
suction line coupling of grease
separator.
