Acer ATL 1820E, Руководство по эксплуатации

Страница: 7 / 76

Page 1-2
3) Never reach into the work area when the spindle is rotating or if the machine
is in automatic mode.
4) Put the machine in manual mode and be sure last programmed function has
been Completed before reaching inside of the work area.
5) The functions of the machine make it impossible to eliminate all pinch points.
Be particularly aware of the following pinch points:
* Spindle and chuck rotation
* Indexing of turret and tools
* Carriage and cross-slide movement
* Tailstock movement, both quill and body
6) Keep machine and area around it clean and well lighted. Never allow chips,
coolant or oil to remain on the floor. Do not leave loose objects on around
machine. Keep area around machine well lighted ( >500 lux ) and dry.
7) Clothing :
* Wear safety glasses with eye shields at all times. Protect your eyes. Never
use a compressed air house to remove chips from a machine.
* Never wear loose fitting clothing. Remove all jewelry (rings, watches,
necklaces…etc.). They can be caught in moving parts of the machine.
* Gloves are easily caught in moving parts. Take them off before turning the
machine on.
* Always wear safety shoes with steel toes and oil-resistant soles.
* Wear a safety helmet when working near overhead hazards.
* If operator has long hair, hair should always be tucked under a cap or tied
back and up.
8) Turning machine are designed to be run by one person. Persons other than
the designated operator should stay out of the machine area during
operation.
9) Take care, not to bump or accidentally touch the machine control. Doing so
can initiate an unintended machine movement which could cause an injury
or a wreck.
10) Do not paint, alter, deface or remove any warning plates from the machine.
11) Report any loose, worn or broken parts to your supervisor. The same action
should be taken if any unusual noise or machine action occurs.
12) Never operate the machine after taking strong medication, using
non-prescription drugs, or consuming alcoholic beverages. Persons with
illness, which might cause dizziness or fainting, should never operate this
machine.
13) The electric components are protected from normal moisture resulting from
humidity use of water base soluble coolant, etc. Do not, however , use water
house to clean the machine or the area around it.