Acer ATL 1820E, Руководство по эксплуатации

Страница: 56 / 76

Page 5-1
5.1 INSTRUCTION MANUAL
INTRODUCTION
To ensure safe operation of your chuck Please read this instruction
Manual and pay particular attentions marked with , including IMPORTANT
instructions concerning chuck performance
5.1.1 SAFETY PRECAUTIONS
Please read this manual and following indications carefully.
DANGER
1. TURN OFF all power before setting, inspecting, lubricating or change the
chuck.
Danger caused by catching operator in a machine.
2. The chuck rotational speed is restricted.
Gripping force decreases due to centrifugal force as speed (r.p.m) of
Chuck increases, thereby causing the discharge or damage of the
workpiece.
3. Main spindle motor speeds (rpm) couldn’t be over the Max. speed of the
Chuck.
4. Spindle cannot start if door is open.
Cover chuck periphery for the lathe without door.
WARNING
We cannot assume responsibility for damage or accidents caused by misuse of
the chuck, through noncompliance with the safety instructions.
1. Secure clamp bolts with specified torque!
2. Never clamp another chuck with the chuck. There is a danger of flying
chuck.
3. Lubricate lubricant once or twice every day according to used conditions
and environment.
Danger by discharge of work piece related with lowering gripping force
caused by insufficient lubrication.
3. Never attempt to remodel! Function may reduce!
3.
When clamping the work, take care not to pinch your hand.
4. After clamping the work with regulated torque, be sure to remove the