Acer ATL 1820E, Руководство по эксплуатации

Страница: 51 / 76

Page 4-8
1. Lubricating Oil and Supplying Coolant
Always use the types of oil specified. Do not mix the oil of different brands
even if they are indicated as the “equivalent oil”. Original maker will not be
responsible for any problem arising from the use of oil not specified by + -.
2. Storing Oil
If oil is stored in user’s shop, observe the following points to prevent the oil
from being degraded. it is advisable to obtain only the amount of oil to be
used.
a) Store the oil in a place where it will not be subject to direct sunlight or
rain.
b) Keep the oil clean. No dirt or water should be allowed to enter the oil
storage tank.
c) Never use degraded oil or oil with foreign matter or water.
d) If middle tank is used. Clean the tank at least once a year.
3. Cautions when Replenishing Oil
a) Always use the same oil jug for the same oil. Never use a jug used for
different brand oil.
b) Never remove the filter from the filter port when supplying oil.
c) If oil other than specified by original maker, used mistakenly or different
brands of oil are mixed. Clean the tank and piping immediately.
4. Disposing Waste Oil
Disposing factory waste without legal permission is not allowed. Always ask
the service company when disposing oil.
5. Supplying Oil
Supplying Oil to the Slid way lubricating Oil Tank
a) Check the lubricating oil tank volume with the oil level gage installed on
the lubricating oil tank.
b) Remove the cap on the oil supply port.
c) Supply the specified lubricating oil from the oil jug while checking the oil
level with the oil level gauge.
6. Supplying Coolant to the Coolant tank
a)
Press the coolant off switch to stop coolant supply.
b)
Check the coolant tank volume with the oil level gage.