Acer AN515-51, Руководство по обслуживанию

Страница: 46 / 294

2-8 System Utilities
Security Tab
The Security tab allows the user to configure and protect the computer from unauthorized use.
Figure 2-4. BIOS Security (Windows 10)
Table 2-13. BIOS Security Tab Parameters (Windows 10)
Item Name Example Remark
Supervisor
Password
[Set] / [Clear]
This field indicates if Supervisor Password is set or not.
• [Set]: Supervisor Password is set.
• [Clear]: Supervisor Password is not set.
The default value is [Clear].
User Password [Set] / [Clear]
This field indicates if User Password is set or not.
• [Set]: User Password is set.
• [Clear]: User Password is not set.
The default value is [Clear].
HDD Password [Set] / [Clear]
This field indicates if HDD Password is set or not.
• [Frozen]: If HDD status is frozen.
• [Set]: HDD Password is set.
• [Clear]: User Password it not set.
The default value is [Clear].
For NVMe SSD which doesn't support HDD password,
BIOS must display "HDDx:
NVMe SSD don't support
HDD password " .
F1 Help Select Item F5/F6 Change Values F9 Setup Defaults
Esc
Exit Select Menu
Enter Select
►
Sub-Menu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
Supervisor Password Is: Clear
User Password Is: Clear
HDD0 Password Is: Clear
HDD1 Password Is: Clear
Set Supervisor Password [Enter]
Set User Password [Enter]
Set HDD0 Password [Enter]
Set HDD1 Password [Enter]
Password on Boot [Disabled]
Secure Boot Mode: Standard
Erase all Secure Boot: [Enter]
Select an UEFI file as [Enter]
for executing :
Restore Secure Boot to
[Enter]
Factory Default :
Current TPM (TCM) State : Install
Change TPM (TCM) State : [Enable]
Clear TPM (TCM) : [Clear]
Information Main Advanced Security Boot Exit
Item Specific Help
Supervisor Password controls access
to the whole setup utility. It can be
used to boot up when Password on
boot is enabled.