Accton Technology ES4626, Руководство по управлению

Страница: 222 / 523

222
8.2.2.15 dot1x timeout re-authperiod
Command: dot1x timeout re-authperiod <seconds>
no dot1x timeout re-authperiod
Function:
Configure switch re-authenticate time interval to supplicant; use the “no”
command to restore default.
Parameter: <seconds>
re-authenticate time interval, unit is second, The range: 1~65535.
Command mode:
global configuration mode
Default:
Default is 3600 seconds.
Instructions:
When modify switch re-authenticate time interval to supplicant, must enable
dot1x re-authentication first. If did not configure switch re-authenticate function, the
configured time interval of switch re-authenticate to supplicant will not be effective.
Example:
Configure re-authentication time as 1200 seconds.
Switch(Config)#dot1x timeout re-authperiod 1200
8.2.2.16 dot1x timeout tx-period
Command: dot1x timeout tx-period <seconds>
no dot1x timeout tx-period
Function:
Configure the time interval which of switch retransmit EAP-request/identity
frame to suppliant; use the “no” command to restore default.
Parameter: <seconds>
is the time interval of retransmit EAP request frame, unit is
second, The range: 1~65535.
Command mode:
global configuration mode
Default:
Default is 30 seconds.
Instructions:
suggest using default value.
Example:
Modify the retransmit EAP request frame time interval as 1200 seconds.
Switch(Config)#dot1x timeout tx-period 1200
8.2.2.17 radius-server accounting host
Command: radius-server accounting host <ip-address> [port <port-number>]
[primary]no radius-server accounting host <ip-address>
Function:
Configure RADIUS accounting server IP address and monitor port ID; use
the “no” command to remove RADIUS accounting server .
Parameter: <ip-address>
server IP address;
<port-number>
is server monitor port ID,
The range: 0~65535;
primary
is primary server, when configure RADIUS server, may
configure many servers, when not configure
primary
, finding usable RADIUS server