Accton Technology ES4626, Руководство по управлению

Страница: 375 / 523

375
introducing routes from the other routing protocols to RIP. When using “
redistribute
”
command to introduce routes of the other protocols without specifying detailed route
metric, the default route metric set by “
default-metric
” command applies.
Example:
Set the default route metric for introducing routes of the other protocols into RIP
to 3.
Switch(Config-router-rip)#default-metric 3
Related command: redistribute
15.3.2.2.3 ip rip authentication key
Command: ip rip authentication key <name-of- key >
no ip rip authentication key
Function:
Specify the key to use for RIP authentication; the “
no ip rip authentication
key-chain
” command cancels the RIP authentication.
Parameter: <name-of- key >
is a string, up to 16 characters are allowed.
Default:
RIP authentication is disabled by default.
Command mode:
Interface Mode
Usage Guide:
Instead of deleting the RIP authentication key, the “
no ip rip
authentication key-chain
” command cancels the RIP authentication.
Related command: ip rip authentication
15.3.2.2.4 ip rip authentication mode
Command: ip rip authentiaction mode {text|md5 type {cisco|usual}}
no ip rip authentication mode
Function:
Set the authentication method; the “
no ip rip authentication mode
” command
restores the default plain text authentication method.
Parameter:
“
text
” for text authentication; “
md5
” for MD5 authentication. There two MD5
authentication methods, Cisco MD5 and conventional MD5.
Default:
The default setting is text authentication.
Command mode:
Interface Mode
Usage Guide:
RIP-I does not support authentication, RIP-II support 2 authentication
methods: text authentication (Simple authentication) and packets authentication (MD5
authentication). There 2 packets types used in MD5 authentication, one format complies
with RFC1723 (RIP Version 2 Carrying Additional Information), the other format conforms
to RFC2082 (RIP-II MD5 Authentication).
Example:
Set Cisco MD5 authentication on interface vlan1, the authentication key is
“switch”.
Switch(Config-If-Vlan1)#ip rip authentication mode md5 type cisco
Switch(Config-If-Vlan1)#ip rip authentication key switch