Accton Technology ES4626, Руководство по управлению

Страница: 521 / 523

521
Usage Guide:
This command is used to configure the commander switch remotely. Users
have to telnet the commander switch by passing the authentication. The
command “
exit
” is used to quit the configuration interface of the commander
switch. If this command is executed in the commander switch, an error will be
displayed.
Example:
In the member switch, enter the configuration interface of the commander
switch.
Switch#rcommand commander
18.2.2.9 cluster reset member
Command: cluster reset member <mem-id>
Function:
In the commander switch, this command can be used to reset the member
switch.
Parameter: <mem-id>
is the cluster ID of the member switch, valid rang is 1 to 23.
Command mode:
Admin Mode
Usage Guide:
In the commander switch, users can use this command to reset a member
switch. If this command is executed in a non-commander switch, an error will be
displayed.
Example:
In the commander switch, reset the member switch 16.
Switch#cluster reset member 16
18.2.2.10 cluster update member
Command: cluster update member <mem-id> <src-url> <dst-url> [ascii | binary]
Function:
In the commander switch, this command is used to remotely upgrade the
member switch.
Parameter: <mem-id>
is the cluster ID of the member switch, valid rang is 1 to 23;
<src-url>
is the source path of the file which need to be copied;
<dst-url>
is the
destination path of the file which need to be copied;
ascii
means that the file is transmitted
in ASCII format;
binary
means that the file is transmitted in binary. When
<src-url>
is a
FTP address, its format is like: ftp: //
<username>
:
<password>
@<
ipadress>
/
<filename>.
<username>
is the FTP user name,
<password>
is the FTP password, <
ipadress>
is the
IP address of the FTP server and
<filename>
is the file name. When
<src-url>
is a TFTP
address, its format is like: tftp: //<
ipadress>
/
<filename>.
<
ipadress>
is the IP address of
the TFTP server and
<filename>
is the file name.
The special keywords of filename: