Accton Technology ES4626, Руководство по управлению

Страница: 50 / 523

50
2.2.5.7 show startup-config
Command: show startup-config
Function:
Display the switch parameter configurations written into the Flash memory at
the current operation, those are usually also the configuration files used for the next
power-up.
Default:
If the configuration parameters read from the Flash are the same as the default
operating parameter, nothing will be displayed.
Command mode:
Admin Mode
Usage Guide:
The
show running-config
command differs from
show startup
-
config
in
that when the user finishes a set of configurations,
show running-config
displays the
added-on configurations whilst
show startup
-
config
won’t display any configurations.
However, if
write
command is executed to save the active configuration to the Flash
memory, the displays of
show running-config
and
show startup
-
config
will be the
same.
2.2.5.8 show interfaces switchport
Command: show interfaces switchport [ethernet <interface >]
Function:
Display VLAN interface mode and VLAN number, and Trunk port information
for the switch.
Parameter: <interface >
is the port number, which can be any port information exist in the
switch.
Command mode:
Admin Mode
Example:
Display the VLAN information for interface ethernet 1/1.
Switch#show interfaces swichport ethernet 1/1
Ethernet1/1
Type : Universal
Mac addr num : -1
Mode : Access
Port VID : 1
Trunk allowed Vlan : ALL
Displayed information Description
Ethernet1/1 Corresponding Ethernet interface number;
Type Current Interface Type
Mac addr num MAC address number can be learn by the current
interface
Mode : Access VLAN mode of the current Interface