Accton Technology ES4626, Руководство по управлению

Страница: 157 / 523

157
5.3.2.3 garp timer hold
Command: garp timer hold <timer-value>
no garp timer hold
Function:
Set the
hold
timer for GARP; the “
no garp timer
hold” command restores the
default timer setting.
Parameter: < timer-value>
is the value for GARP
hold
timer, the valid range is 100 to
327650 ms.
Command mode:
Interface Mode
Default:
The default value for
hold
timer is 100 ms.
Usage Guide:
When GARP application entities receive a
join
message,
join
message
will not be sent immediately. Instead,
hold
timer is started. After
hold
timer timeout, all
join
messages received with the hold time will be sent in one GVRP frame, thus
effectively reducing protocol message traffic.
Example:
Set the GARP
hold
timer value of port 1/10 to 500 ms.
Switch(Config-Ethernet1/10)#garp timer hold 500
5.3.2.4 garp timer leaveall
Command: garp timer leaveall <timer-value>
no garp timer leaveall
Function:
Set the
leaveall
timer for GARP; the “
no garp timer leaveall
” command
restores the default timer setting.
Parameter: < timer-value>
is the value for GARP
leaveall
timer, the valid range is 100 to
327650 ms.
Command mode: Global Mode
Default:
The default value for
leaveall
timer is 10000 ms.
Usage Guide:
When a GARP application entity starts, the
leaveall
timer is started at the
same time. When
leaveall
timer timeout, the GARP application entity will send a
leaveall
message. Other application entities will cancel all property information for that application
entity, and the
leaveall
timer is cleared for a new cycle.
Example:
Set the GARP
leaveall
timer value to 50000 ms.
Switch(Config)#garp timer leaveall 50000
5.3.2.5 bridge-ext gvrp
Command:
bridge-ext
gvrp