Accton Technology ES4626, Руководство по управлению

Страница: 437 / 523

437
15.5.2.6 Global RIP mode configuration
Click RIP mode configuration. The configuration page is shown.
The explanation of each field is as below:
Set receiving/sending RIP version for all ports – Configure receiving/sending RIP version
for all ports: version1, version2 and Cancel (default version). See the equivalent CLI
command at 15.3.2.2.19
Auto-summary – Configure auto-summary: apply and cancel: See the equivalent CLI
command at 15.3.2.2.1
Rip priority(0-255) – Specify rip priority. See the equivalent CLI command at 15.3.2.2.16
Set default route cost for imported route(1-16) - Set default route cost for imported route.
See the equivalent CLI command at 15.3.2.2.2
Rip checkzero – Configure RIP packet checkzero. See the equivalent CLI command at
15.3.2.2.15
Rip broadcast – Configure sending RIP broadcast and multicast packet on all the ports.
See the equivalent CLI command at 15.3.2.2.14
For example: Set each field and then click Apply.