Accton Technology ES4626, Руководство по управлению

Страница: 221 / 523

221
Command: dot1x re-authenticate [interface <interface-name>]
Function:
Configure the 802.1x re-authenticate to all port or some specific port in time,
not need to wait for time to expire.
Parameter: <interface-name>
is port ID, if there’s no parameter, it means all port.
Command mode:
privilege configuration mode
Instructions:
This command which belong to privilege mode, after configured this
command, switch re-authenticate to client at once, not need to wait re-authenticate clock
expire. After authenticated, this command will be invalid.
Example:
Re-authenticate port 1/8 in time.
Switch#dot1x re-authenticate interface Ethernet 1/8
8.2.2.13 dot1x re-authentication
Command: dot1x re-authentication
no dot1x re-authentication
Function:
Configure to allow re-authentication to suppliant periodicity; use the “no”
command to disable this function.
Command mode:
global configuration mode
Default:
The periodicity re-authentication function is disabled in default mode.
Instructions:
When enable periodicity re-authentication function to suppliant, switch will
periodicity re-authentication to suppliant. Normally, suggest not enable periodicity
re-authentication function.
Example:
enable periodicity re-authentication function to suppliant.
Switch(Config)#dot1x re-authentication
8.2.2.14 dot1x timeout quiet-period
Command: dot1x timeout quiet-period <seconds>
no dot1x timeout quiet-period
Function:
Configure the port quiet-period time after suppliant authentication failure; use
the “no” command to restore default.
Parameter: <seconds>
is port keep quiet-period status time length value, unit is second,
The range: 1~65535.
Command mode:
global configuration mode
Default:
Default is 10 seconds.
Instructions:
Suggest using default item.
Example:
Configure quiet-period time as 120 seconds.
Switch(Config)#dot1x timeout quiet-period 120