Accton Technology ES4626, Руководство по управлению

Страница: 377 / 523

377
Related command: no ip rip send version
15.3.2.2.8 ip rip send version none
Command: ip rip send version none
Function:
Disable sending RIP packets on the interface
Default:
Sending RIP packet is enabled by default.
Command mode:
Interface Mode
Usage Guide:
This command is used with the other two commands “
ip rip output
” and
“
ip rip work
”, “
ip rip work
” is equal to “
ip rip input
” & “
ip rip output
” in function, the latter
two commands control the receiving and sending of RIP packet on the interface, the
former equals the total of the latter two commands.
Related command: no ip rip send version
15.3.2.2.9 ip rip receive version
Command: ip rip receive version {1 | 2 | 1 2}
no ip rip receive version
Function:
Configure RIP version to receive on the interface. The default setting is to
receive both RIP v1 and v2 packets; the “
no ip rip receive version
” command restores
the default setting, enables receiving RIP packets on the interface.
Parameter: 1
and
2
stands for RIP version1 and RIP version 2 respectively,
12
stands for
both RIP version 1 and 2.
Default:
The default setting is
12
, i.e., accept both RIP version 1 and version 2 packets.
Command mode:
Interface Mode
15.3.2.2.10 ip rip send version
Command: ip rip send version { 1 | 2 | v2-broadcast }
no ip rip send version
Function:
Configure RIP version to send on the interface; the “
no ip rip send version
”
command restores the default setting, enables sending RIP packets on the interface.
Parameter: 1 | 2
are both RIP version numbers;
v2-broadcast
is broadcast only for RIP-II.
When configured to send RIP-II packets, the interface sends RIP-II packets in multicast by
default, packets are only broadcasted when
v2-broadcast
is set on the interface.
Default:
RIP-II packets are sent by default.
Command mode:
Interface Mode
Usage Guide:
When configured to send RIP-II packets, the interface sends RIP-II packets