AC S.A. All rights reserved. Copying, publishing, distribution and any usage of the full or partial data included in the herewith document, particularly pictures, drawings, illustrations, trade marks etc. is
strictly prohibited under the law.
Page 7 of 54
1.2.3.4
Scheme for connecting STAG 400.6 DPI model A1 or STAG 400.8 DPI model A1
controller
(*) – dedicated connections have been described in the
1.3
Principles regarding installation of particular elements in a vehicle
Prior to commencement of an LPG system installation process, the vehicle must be verified as
suitable. Vehicles displaying engine defects must be restored to a fully operational condition. Particular
attention should be paid to inspection of the ignition system.
With certain engines, it is recommended to replace selected elements of the ignition system just in
case or to warn the customer about the need to replace such elements. Failure to comply with the above-
mentioned recommendations may result in defective operation of an LPG fuelled engine due to reasons
not attributable to the LPG system itself or the installation method.