AC S.A. All rights reserved. Copying, publishing, distribution and any usage of the full or partial data included in the herewith document, particularly pictures, drawings, illustrations, trade marks etc. is
strictly prohibited under the law.
Page 31 of 54
•
3D view
The 3D view is a graphical representation of the 2D view. It is the same map displayed in 3
dimensions.
Figure 2.1.13
3D map view
•
Multiplier line view
This view also enables adjustment of the gas system; yet, one must remember that setting the
multiplier in a given spot results in a change throughout the whole rpm range. Therefore, it is
recommended to finally adjust the system with the 2D view map in the event it is impossible to
adjust a given area for a particular rpm value exclusively with the classic multiplier line view. The
horizontal axis represents the petrol dose, and the vertical axis represents the multiplier value.
Adjusting the multiplier is based on highlighting the spot with the left mouse button and setting
the desired multiplier position using “↑” or “↓”. Press and hold
Shift
to change the multiplier
incrementally by 10 steps. Additionally, the entire multiplier line can be elevated by clicking the
mouse button on the diagram and pressing “↑” or “↓”. In this case, the
Shift
key function also
applies, which allows adjusting the line incrementally.
Figure 2.1.14
The multiplier line; full view