AC S.A. All rights reserved. Copying, publishing, distribution and any usage of the full or partial data included in the herewith document, particularly pictures, drawings, illustrations, trade marks etc. is
strictly prohibited under the law.
Page 53 of 54
Autogas system fault LED –
indication of a failure In the autogas system. After a fault, the
LED is kept ON (amber light). The LED can be also used for information purposes (pulsing
with the buzzer sounds).
The following functionalities are accessible, when LED-500 switchboard is connected to STAG 400
controller:
•
Sound level adjustment for the buzzer installed inside the switch (4 selectable sound
levels);
•
Brightness adjustment for the LEDs (4 selectable brightness levels) – the function is
inactive when "Auto-adjustment of brightness" is ON;
•
Brightness adjustment for the status LED with the STAG logo (4 selectable brightness
levels) – the function is inactive when "Auto-adjustment of brightness" is ON;
•
Selectable activation of automatic adjustment of switch LEDs brightness depending on
the ambient light;
•
Selectable illumination of the status LED with the STAG logo in the petrol-fueling mode;
•
Selectable activation of the error LED working in an informative mode (visual information
according to the sounds generated by the switch). When the "Buzzer" option is selected,
the error LED will pulse according to the sequence of buzzer sounds – the function assists
users with impaired hearing;
•
Sensitivity adjustment for the touch-button (5 selectable sensitivity levels);
•
Automatic identification of the type of connected LED switchboard; a connected LED-500
switchboard is recognised by the application as LED-500.
Figure
2.3.4
LED-500 set-up window
The controller remembers the most recent fuel settings applicable prior to cutting off the
supply voltage with the key.
