AC S.A. All rights reserved. Copying, publishing, distribution and any usage of the full or partial data included in the herewith document, particularly pictures, drawings, illustrations, trade marks etc. is
strictly prohibited under the law.
Page 23 of 54
“Window” menu allows one to restore main windows, in the event they have been
closed. AC STAG enables the user to freely arrange application windows. Use the drag &
drop technique to easily modify location of particular windows. Pressing and holding the
left mouse button on the bar of the selected window allows one to move it. Releasing
the left mouse button causes embedding or extraction of the window depending on the
current position of the cursor.
•
Language –
selection of the language version; AC STAG requires restarting once a new
language version has been selected.
•
Tools –
update of the controller and the LED switchboard, automatic distribution of
setting windows, restoration of the default settings.
Update of the controller as well as the LED switchboard has been discussed in item
2.1.14.
In order to save settings and the controller’s map, select the floppy icon located on the
right-hand side of the
Parameters
window,
or select
Tools → Save parameters
from the main menu.
Figure 2.1.6
“Tools” tab in the Menu bar
Indicate the location on the computer’s hard drive, where the file with the setting is to
be saved, enter the name of the file and click
Save
.
By following the above-mentioned
instructions, the user can save the settings and the maps.
In order to load the settings and the maps, click on the “Open” button located on the
right-hand side of
Parameters
window,
or select
Tools → Open saved parameters
from the main menu.
The application will ask the user to indicate the file with the settings (.set extension).
Indicate the file and open it. Subsequently,
Open saved parameters
window will be
displayed.
The user can open just the settings, just the map or both the settings and the
map simultaneously. Tick the desired selection in the window presented below and click
Ok
.
