PROBOIL.2X user & installation guide v1e-2
5
1.1.3
Intended purpose:
⚠
WARNING
:
This appliance must only be used for heating water.
⚠
This appliance is intended only for domestic use and should not be used for commercial
purposes.
⚠
Do not add to, exchange or modify any component of the boiler, mixer tap, filter or connections
from those supplied and install them only as instructed. The spout exit or any part of the system must
not include any additional third party adaptors or connections that will add resistance to the system.
We only warrant the original filter type supplied with your boiler which is formulated specifically for the PROBOIL
product. If the filter is removed or exchanged for an alternative model it may have a detrimental effect to your system
and accordingly will invalidate your warranty. If you have specific or unusual incoming water conditions, please contact
the service number on the boiler for further advice.
⚠
This appliance is intended to be permanently connected to the water mains.
⚠
The boiler and mixer tap are not designed to work with any other combination of appliances
other than as shown within this guide.
1.1.4
Sensible fire safety precautions:
⚠
Do not store or use petrol or other flammable rags, paper, aerosols, vapours or liquids in the
vicinity of this or any other appliance.
⚠
Install the unit on a heat-resistant surface. Make sure that the installation surface is firm and
level.
⚠
For safety regulations the plug or means of disconnection must always be accessible after
installation.
⚠
Do not use any water jet or steam near this appliance.
⚠
Always ensure an airgap of at least 10mm around the appliance and that any closed cabinet has
sufficient airflow.
