PROBOIL.2X user & installation guide v1e-2
13
15.
Push the new filter cartridge into its wall mounting
clip, ensure to leave the label visible.
16.
Reconnect the water to the filter
(Only If your tap
DOES include a cold filtered water dispense
option):
a.
Turn the tap handle for filtered cold water
fully turned on.
b.
Turn the Tee valve (fig.3) to the on position,
adjust the exact TEE valve position needed to
adjust the flow of filtered water to around 2
litres per minute. This can be checked with a
timer and kitchen measuring jug.
c.
Once adjusted turn off the cold filtered water
tap handle.
(Fig 3.)
17.
Turn the 98°C water handle fully on, note: initially as the air purges you may get some spitting from the end of
the tap, this is normal, leave the 98°C handle in the “on/open” position and flush a for a further 5 minutes or 5
litres.
18.
Wait for the boiler to show “READY” before use.
19.
If the used filter cartridge is applicable for our recycling scheme please leave it upwards in the sink to drain any
residual water from inside before packing and returning it as instructed.