Abicor Binzel ABIROB, Руководство по эксплуатации

Страница: 28 / 88

EN - 10
6 Putting into operation ABIROB
®
A
5 Tighten the hexagonal head screws using the Allen key (7) .
6 Insert the Neck Liner (5) on the connection side through the connecting
module (6) into the torch neck (4) .
6.2 Equipping the hose assembly
1 Lay out the hose assembly (7) straight and attach it to the connection
module (1) on the torch neck side.
2 Slide the ready-to-use wire guide from the central plug (5) up to the stop in
the changeable body and screw it down by means of the connection nut
(6) .
If required, connect the EMERGENCY STOP cable (2) of the CAT robot mount
(8) to the hose assembly (7) .

See 6.4 Connect the control line on page EN-11
6.3 Mounting the machine side connection

See Fig. 5 Equipping the hose assembly on page EN-10
1 Connection module
2 EMERGENCY STOP cable
3 Control line
4 Air-blast hose
5 Central plug
6 Connection nut
7 Hose assembly
8 CAT robot mount
Fig. 5 Equipping the hose assembly
1 2 3
4
5 6 7
8
NOTE
• Select the proper wire type and the related wire guide.
• For cutting the wire size and for correct mounting, please observe the
following chapters:

See 9 Maintenance and cleaning on page EN-13
• Guide spiral liners = for steel and stainless steels
• PA liners = for aluminum, copper, nickel and stainless steels