Abbott i-STAT 1, Системное руководство

Страница: 282 / 658

Art: 725768-00E Rev. Date: 04-Jan-12 8
•
If “Use Default Profile” is not checked beside any location-based customization profile:
double click the box under the “i-STAT Analyzer CLEW ” column.
•
Click the new version of
CLEW, and then click OK.
Click Yes for the confirmation message.
•
Underneath the “Default customization profile:” column:
o
Double click on the “ i-STAT 1 Software: ” button
o
Select the JAMS version that matches the Product Update
o
Click
OK.
2.7: Update the software in the i-STAT 1 handheld
•
Go to the location where the i-STAT 1 handheld you wish to update are located or con -
tact someone at that location who can assist in updating the handheld(s).
•
Press the
On/Off button on the handheld.
•
Press the
Menu key to bring up the Administration Menu.
•
Press
7 – Utility
. When prompted for a password, press
ENT. If that did not work, a
password is needed. Enter the password defined by your facility and press
ENT.
•
From the Utility menu, press
3 – Receive Software
. A “Waiting to Send” message will
appear on the handheld display.
•
Place the handheld in the Downloader or Downloader/Recharger.
Do NOT move the
handheld until step 2.8. A Communication in Progress message will appear on the
screen. After this disappears, the handheld display will stay blank for approximately
5-10 seconds.