BUSCH-/ABB-SECURE@HOME
2CSM600727D0901
48/74
12
PROGRAMMING
At the time of first log-in, the guided sequence of steps (Wizard) set out in the Quick Guide
manual for the Central unit allows the system to be programmed for the first time.
This initial configuration can in any case be increased or modified from the installer screen:
The icons are described in paragraph
11.2.1 Authentication.
12.1
System creation
The system creation process consists of acquiring and programming the various devices
(detectors, repeaters, remote controls and alarms) and services (telephones) required to
create and configure users and for the final system test.
During the work system, the menus can be navigated in reverse by pressing the
key,
without needing to log in for each operation.
WARNING!
If you inadvertently leave the main menu and return to the idle system screen, you
will need to log in again.
12.2
Programming zones and sensors
12.2.1
To programme a new zone:
1.
Access the installer screen and log in as a level 3 user
2.
Select the Zones and Sensors icon
3.
The list of zones already created on the system and the Technological zone (always
available) will appear.
4.
Select New Zone
5.
Modify the default sticker (optional)
Zones and sensors
Zone A
2 Window Contact
0 IR Sensors
0 Other
Rename
New Device
Delete
