BUSCH-/ABB-SECURE@HOME
2CSM600727D0901
34/74
INSTALL AND CONFIGURE THE SYSTEM
This section of the manual contains all of the information to use, configure and maintain the
alarm central unit. It also provides suggestions for planning an Intrusion alarm system,
includes a list of the technical specifications of the central unit and sets out the procedures
for isolating the system and resolving any faults.
This section is intended for use by the technician who installs the system.
9
MAIN CHARACTERISTICS
9.1
Main functions of the central unit
The central unit communicates with the other system devices via radio-frequency and
provides the user with the following functions:
-
management of anti-intrusion and domestic security devices;
-
management of panic reports;
-
external device implementation commands;
-
alarm notifications, via voice messages or SMS, to the programmed telephone
numbers;
-
system remote control via SMS;
-
integration of the Home Automation Busch-/ABB-free@home system
9.2
System capacity
The central unit manages up to 8 programmable zones, each of which can contain up to a
maximum of 64 detectors, for an overall total of 64 across the system. The number of actual
zones is determined during the central unit configuration phase.
Zones can be individually programmed as follows:
-
intrusion alarm - up to a maximum of 7 zones
-
technological alarms (smoke, flooding, gas) - 1 zone active on a 24h basis;
The central unit manages up to:
-
4 external sirens;
-
4 signal repeaters; (1)
-
16 remote control devices to activate or deactivate the intrusion alarm system; (1)
-
12 programmable telephone numbers to which alarm reports and events can be sent.
(1)
The signal repeaters devices are not IMQ-Security Systems certified
