BUSCH-/ABB-SECURE@HOME
2CSM600727D0901
45/74
11.4
Authentication
For general information on authentication, refer to chapter 2.4.
WARNING!
In working mode, no level 3 user can access the system unless authorised by a level
2 user.
1.
Press the ok key on the key pad. A window will appear showing the level 2 users set
up for the system;
2.
Select the user from the list and enter the PIN. The digits entered appear as asterisks
(*).
3.
Press the
ok
key to confirm. If the PIN entered is not 5 digits long, the
ok
key will not
be accepted. If the user enters the wrong PIN, a tampering alarm is generated on the
tenth attempt.
4.
If the authentication process is successful, the main user menu screen appears
(described in chapter 2.3).
5.
Select the
icon and enter a valid PIN to access the Installer screen.
Installer access (level 3)
Icon
Meaning
Zones and Sensors. This provides access to the zones and sensors programming menu
System test. Provides access to the system test menu.
System devices This provides access to the main system device programming menu (remote
controls, keypads, sirens, repeaters)
Maintenance. This provides access to the system maintenance menu (access only granted to a
level 4 user)
User management: this allows management of system users, setting their PINs, permissions and
access restrictions
Select a user
User 1
User 2
User 3
Zones and sensors
