ABB HVC-C 100-150 kW, Руководство по установке

Страница: 50 / 106

Procedure
1. Align the holes in the brackets (A)
with the holes in the box (B).
Note: Install all four
brackets either
horizontally or vertically.
2. Install the washers (D) on the bolts
(C).
3. Install the bolts (C) in the holes
from the back of the box.
4. Tighten the bolts to the correct
torque. For the specifciation, refer
to section 20.5 .
10.4 Install the power supply box on the wall
Preliminary requirements
1. The holes in the wall are
prepared. Refer to section
10.2
.
2. The brackets are installed
on the box. Refer to
section 10.3 .
• Four anchor screws M8x80
• Torque screwdriver
• Spirit level
Procedure
1. Hold the box against the wall.
2. Align the holes in the brackets (A),
installed horizontally or vertically,
with the holes in the wall (B).
3. Install the mounting screws (C).
4. Tighten the screws to the correct
torque. For the specification, refer
to section
20.5
.
A D C
B
B A
C
Mechanical installation of the power supply box
50
6AGA000007-0611-EN | 001