ABB HVC-C 100-150 kW, Руководство по установке

Страница: 45 / 106

9 Mechanical installation of the power cabinet
9.1 Install the power cabinet - general procedure
Preliminary requirements
1. The cabinet is above the foundation.
Procedure
1. Install the cabinet on the foundation. Refer to section
9.2
.
2. Open the cable inlets. Refer to section
9.3
.
3. Guide the cables to the power cabinet. Refer to section
9.4
.
4. Close the cable inlets. Refer to section
9.5
.
5. Install these parts:
a. Cover plate of the foundation. Refer to section 9.6.2 .
b. Bottom covers of the power cabinet. Refer to section
18.5
.
9.2 Install the cabinet on the foundation
Preliminary requirements
• Hoisting equipment or
forklift truck
• Torque wrench
• Four fasteners M16 with
washers
Procedure
1. Carefully lower the cabinet on the
foundation with a hoisting equipment
or a forklift truck. Refer to section 4.2 .
Caution: Make sure that
there is no kink in the
cables.
2. Make sure that the holes in the cabinet
(A) and the foundation (B) are aligned.
3. Install the fasteners (C) with washers.
4. Tighten the fasteners to the correct
torque. For the specification, refer to
section 20.5 .
9.3 Open the cable inlets
Preliminary requirements
• Open spanner
A
C
B
Mechanical installation of the power cabinet
6AGA000007-0611-EN | 001 45