ABB HVC-C 100-150 kW, Руководство по установке

Страница: 70 / 106

Procedure
1. Strip the insulation from the end of
the cable (A). For the specifciation,
refer to section
20.12.10
.
2. Prepare the wires:
a. Twist the shield mesh (B).
b. Strip the insulation from the
end of the wires (C) to (F). For
the specifciation, refer to
section
20.12.10
.
c. Crimp ferrules onto the end of
the wires and the shield.
3. Loosen the screws on the terminals
(G) to (L).
4. Connect these wires:
a. Shield (B) to terminal X1-47 (G)
b. PS1_OK/14 (C), blue, to terminal X1-46 (L)
c. PS1_OK/13 (D), black, to terminal X1-45 (J)
d. OVP_AC_11 (E), yellow, to terminal X1-43 (K)
e. OVP_AC_14 (F), gray, to terminal X1-44 (H)
5. Tighten the screws to the correct torque. For the specification, refer to section
20.5
.
G
L
H
K
J
F
C
B
A
E
D
Electrical installation of the control box
70
6AGA000007-0611-EN | 001