ABB HVC-C 100-150 kW, Руководство по установке

Страница: 52 / 106

Procedure
1. Align the holes in the brackets (A)
with the holes in the box (B).
Note: Install all four
brackets either
horizontally or vertically.
2. Install the washers (D) on the bolts
(C).
3. Install the bolts (C) in the holes
from the back of the box.
4. Tighten the bolts to the correct
torque. For the specifciation, refer
to section 20.5 .
11.4 Install the control box on the wall
Preliminary requirements
1. The holes in the wall are
prepared. Refer to section
11.2
.
• Four anchor screws M8x80
• Torque screwdriver
• Spirit level
Procedure
1. Hold the box against the wall.
2. Align the holes in the brackets (A)
with the holes in the wall (B).
3. Install the mounting screws (C).
4. Tighten the screws to the correct
torque. For the specification, refer
to section
20.5
.
A D C
B
B A
C
Mechanical installation of the control box
52 6AGA000007-0611-EN | 001
Installation of Cable Reel is included in other manual.