32
UAV- M I CROPORTA B LE A N A LY ZE R S |
G L A 1 3 3 SER I E S | U M/G L A 1 3 3 - EN R E V. B
Analyzer Shutdown
To properly shut down the analyzer, perform a soft shutdown
by first selecting
Exit
on the
Control Bar . (Figure 21) When
the dialog box appears with the question, Do you wish to
shutdown?, click
OK
. (Figure 49)
. . .7 User Interface Operation
Set OA-ICOS Default Data
The
Set ICOS Default Data feature removes all measurement
data and created users and disables the VNC server .
This feature may be applicable when the analyzer is
decommissioned or released from active service .
This feature requires the lgr user Linux account and does the
following:
• Sets default passwords in the user management group
• Removes all measurement data and created users
• Disables the VNC server
To set the OA-ICOS default settings, perform the following:
1
From the
Setup screen, click the
Security
tab .
2
Click
Clear Icos Data
: The
Clear Icos Data dialog-box shown
in Figure 47 will appear .
3
Enter the lgr user Linux password in the
lgr Password
field .
(The default lgr user Linux password is 3456789 .)
4
Click
Clear Data
: The message shown in Figure 48 appears .
5
Click
Yes
.
Figure 47 Clear Icos Data Dialog-Box
Figure 49 Shutdown Dialog-Box
Figure 48 Clear ICOS Data Message
