28
UAV- M I CROPORTA B LE A N A LY ZE R S |
G L A 1 3 3 SER I E S | U M/G L A 1 3 3 - EN R E V. B
User Management
The
User Management area lets you do the following:
• Change the VNC server password
• Change the SSH password
• Change the Samba Share password
• Add and delete users, and assign to groups
Change VNC Server Password
To change the VNC server password, perform the following:
1
From the
Setup screen (Figure 33), click the
Security
tab .
2
Click
Remote Login (VNC)
: The dialog box shown in Figure
40 appears . Click
Enable
.
3
A message appears stating the connection to the VNC Server
will not be encrypted, as shown in Figure 41 .
. . .7 User Interface Operation
Security
Click
Setup
on the
Control Bar (Figure 21), then click the
Security
tab to access the
Security screen . (Figure 39) This
screen lets you change security settings including changing
passwords; adding, deleting, and assigning users; and
returning the system to default settings . Returning to default
settings restores default passwords, removes all users except
lgr, and deletes all data .
Figure 39 Security Screen
Figure 40 Remote VNC Login
Figure 41 VNC Server Warning Message
NOTE
The VNC server is disabled by default because transfer via
VNC is not secured . However, authentication credentials are
sent securely .
