ABB GLA133 Series, Руководство пользователя

Страница: 30 / 37

30
UAV- M I CROPORTA B LE A N A LY ZE R S |
G L A 1 3 3 SER I E S | U M/G L A 1 3 3 - EN R E V. B
Change Samba Share Password
To change the Samba Share password, perform the following:
1 From the Setup screen (Figure 33), click the Security tab .
2 Click Samba Share (data) . (Figure 39) The Change Samba
Password dialog-box appears . (Figure 45)
3 Enter the lgr Password . (The default lgr password is
3456789 .)
4 Enter the new password in the New Samba Password field .
5 Re-enter the new password in the Confirm New Password
field .
6 Click Change Password .
. . .7 User Interface Operation
Figure 45 Change Samba Password Dialog-Box
Manage User Accounts
User Levels
The analyzer is shipped with one Admin user, lgr , which cannot
be deleted . Refer to Table 13 for user level access .
Table 13: User Level Access
Admin Service User
Display
Screens
Numeric ✔ ✔ ✔
Spectrum
✔ ✔ ✔
Time Chart ✔ ✔ ✔
Alarm Status
✔ ✔ ✔
Main
Buttons
Rate ✔ ✔ ✔
File Transfer
✔ ✔ ✔
Setup ✔ ✔ ✔
Exit
✔ ✖ ✖
Setup Panels
Time/Files ✔ ✔ 🔒
Calibration
✔ ✔ 🔒
Laser Adjust ✔ ✔ 🔒
MIU ✔ ✔ 🔒
Analog Output ✔ ✔ 🔒
Serial Logger ✔ ✔ 🔒
Service ✔ ✔ 🔒
Bluetooth Daemon ✔ ✔ 🔒
Security ✔ ✔ 🔒
Security
Panel
Change VNC password ✔ 🔒 🔒
Change SSH password ✔ 🔒 🔒
Change Samba password ✔ 🔒 🔒
User account management ✔ 🔒 🔒
Clean ICOS data (decommission) ✔ 🔒 🔒
✔ Changeable
🔒 Read Only
✖ Not Accessible
The lgr user and users belonging to the Admin and Service
groups can add new users and delete users using the
Group/
User Account screen .