ABB DressPack IRB6650S, Руководство по эксплуатации продукта, Страница: 197 / 390

Shop compressed air supply
Use this procedure to connect the Water and Air unit to the shop compressed air
supply.
Note Action
Connect the air hose to the fitting with a
G½" thread on the air shut off valve (C).
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
1
Water drain connection, One water return
Use this procedure to connect the water drain connection with one water return,
to the Water and Air unit.
Note Action
Route the water drain hose through the
lower hole in the mounting plate. 1
xx0600003348
Connect the hose to the fitting with a G½"
thread on the check-valve.
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
2
• B: Water drain connection, one
water return
Water drain connection, Two water return
Use this procedure to connect the water drain connection with two water return,
to the Water and Air unit.
Note Action
xx0600003349
Connect the hose to the bulkhead fitting
with a G½" thread.
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
Note
Any rotation of the bulkhead fitting must be
avoided when mounting. Hold the
outer part
of the bulkhead fitting with a suitable tool,
in order to prevent rotation.
1
Parts:
• H: Bulkhead fitting
• I: Outer part of bulkhead fitting
Continues on next page
Product manual - DressPack/SpotPack IRB 6650S 197
3HAC055424-001 Revision: C
© Copyright 2004-2018 ABB. All rights reserved.
2 Installation
2.6.1 Installation of Water and air unit
Continued